0
0
 
 
 
0
 
0
 
0
 
0
 
 
 
0
 
 
Concrete structures get to have dry shrinkage and creep, depending on the environment such as temperature and humidity so the structures get cracked or the exterior finishing materials come off. And they also have small watertightness and accordingly, they get to have corrosion, neutralization, and dew. In addition, the structures under ground (internal and external wall) are always exposed to moisture so its adhesion with the main body is poor or weak, which causes several problems. On the contrary, this ceramic Resiscon has similar elasticity with concretes and it has good strength and durability so even under moisture and water, construction work is possible. It is a new environment-friendly inorganic material.
 
Items Resiscon Remark
Specific Gravity 1.15~1.5 Waterpoof materials, sea damage & neutralization preventive materials
1.5~2.5 Sectional repairing materials & paving materials
Compressive Strength 40MPa~100MPa Sectional repairing materials & paving materials
Tensile Strength 12MPa~15MPa Resiscon (Cavity)
Bending Strength 15MPa~25MPa Resiscon (Cavity)
Bond Strength 7MPa~20MPa Resiscon (Cavity)
Neutralization Test No Problem Resiscon (Cavity)
Chloridation Ion Penetration Resistance Test 0C~5C Resiscon (Cavity)
Freezing and Thawing Resistance Test 0%~5% Sectional repairing materials & paving materials
 
0
 
0
 
General steel structures (bridges, steel pipe piles, drainage pipes) are applied with urethane, chlorinated rubber, fluorine resin, water, inorganic matter, and epoxy, but according to the environment, there are many problems in terms of adhesive power and durability. In addition, use of thinner and diluents causes serious environmental pollution like VOC. On the contrary, this ceramic Resisteel system has great adhesive power and its durability is semi-permanent. It is a new environment-friendly anticorrosive material of inorganic and non-solvent type.
 
Items Resisteel Remark

Specific Gravity

1.5~1.8 Anticorrosive
1.8~2.5 Sectional repairing materials
Compressive Strength 80MPa~100MPa Sectional repairing materials
Tensile Strength 15 MPa~15MPa Sectional repairing materials
Bond Strength 15MPa~25MPa Anticorrosive, sectional repairing materials
Salt Spray Test 7MPa~20MPa Anticorrosive
Impact Resistance No Problem Anticorrosive
Flex Resistance 0C~5C Anticorrosive
Wear Resistance 0%~5% Anticorrosive
 
 
0